TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 882 of 1558
TM 9-2320-366-20-4 12-9. INTERMEDIATE AND REAR AXLE CENTRAL TIRE INFLATION SYSTEM (CTIS) QUICK RELEASE VALVE AND BRACKET REPLACEMENT (CONT) WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (2) Apply antiseize compound to threads of two 45-degree fittings (7) and 90-degree fitting (8). (3) Install two 45-degree fittings (7) and 90-degree fitting (8) in quick release valve (9). (4) Install quick release valve (9) on vehicle with two washers (10), screws (11), washers (12), and nuts (13). (5) Connect three air hoses (14) to quick release valve (9). c. Follow-On Maintenance. (1) Start engine and allow enough time for air pressure to reach normal operating pressure (TM 9-2320-366-10-1). (2) Check quick release valve for air leaks. (3) Shut down engine (TM 9-2320-366-10-1). End of Task. 12-24