TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 877 of 1558
TM 9-2320-366-20-4 12-8. FRONT AXLE CENTRAL TIRE INFLATION SYSTEM (CTIS) QUICK RELEASE VALVE REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Air tanks drained (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Goggles, Industrial (Item 15, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Antiseize Compound (Item 58, Appendix D) Nut, Self-Locking (2) (Item 167, Appendix G) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. NOTE Tag air hoses and connection points before disconnecting. (1) Disconnect three air hoses (1) from quick release valve (2). (2) Remove two self-locking nuts (3) and washers (4) from screws (5). Discard self-locking nuts. (3) Remove two screws (5), washers (6), and quick release valve (2) from frame (7). Change 1 12-19