TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 872 of 1558
TM 9-2320-366-20-4 12-7. MANIFOLD VALVE ASSEMBLY REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Assembly d. Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Air tanks drained (TM 9-2320-366-10-1). Kick panel removed (para 16-3). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Socket Set, Socket Wrench (Item 34, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Antiseize Compound (Item 58, Appendix D) Ties, Cable, Plastic (Item 69, Appendix D) a. Removal. NOTE Tag air hoses and connection points prior to disconnecting. (1) Disconnect connector P113 (1) from manifold valve assembly (2). (2) Disconnect connector P112 (3) from manifold valve assembly (2). (3) Disconnect three air hoses (4) from 90-degree fittings (5). (4) Remove four screws (6) and manifold valve assembly (2) from cab (7). 12-16 Change 1