TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 862 of 1558
TM 9-2320-366-20-4 12-3. WHEEL STUD REPLACEMENT (CONT) b. Installation. (1) Install wheel stud (1) in wheel hub (2). NOTE Use a nut that was removed during wheel removal to perform step (2). (2) Install nut (3) on wheel stud (1) with flat side of nut (3) toward wheel hub (2). (3) Tighten nut (3) until wheel stud (1) is seated in wheel hub (2) as far as threads will allow. (4) Remove nut (3) from wheel hub (2). (5) Install nut (3) on wheel stud (1) with beveled side of nut (3) toward wheel hub (2). (6) Tighten nut (3) until wheel stud (1) is seated in wheel hub (2). (7) Remove nut (3) from wheel hub (2). WARNING Wheel drum weighs approximately 92 lbs (42 kgs). Use the aid of an assistant to help install wheel drum on axle. Failure to comply may result in injury to personnel. NOTE Step (8) requires the aid of an assistant. (8) Install wheel drum (4) on wheel hub (2). c. Follow-On Maintenance. (1) Uncage rear spring brakes (para 11-6). (2) Install tire (TM 9-2320-366-10-2). End of Task. 12-6