TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 858 of 1558
TM 9-2320-366-20-4 Section II. MAINTENANCE PROCEDURES 12-2. WHEEL REPAIR This task covers: a. Disassembly b. Assembly c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Tire removed (TM 9-2320-366-10-2). CTIS hose assemblies, manifold valve, kneeling valve and bracket removed (para 12-5). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Iron, Tire (Item 20, Appendix C) Wrench, Torque, 0-600 lb-ft (Item 60, Appendix C) Wrench Set, Socket (Item 50, Appendix C) Materials/Parts Packing, Preformed (Item 190, Appendix G) Nut, Self-Locking (20) (Item 145, Appendix G) Nut, Self-Locking (4) (Item 171, Appendix G) Personnel Required (2) References TM 9-2610-200-14 WARNING • Ensure that tire is totally deflated before removing self-locking nuts. Failure to comply may result in serious injury or death to personnel. • Always use an inflation safety cage to inflate tires mounted on multipiece rims, and tire/rim assemblies not mounted on a tire changing machine that has a positive lock down device designed to hold the assembly during inflation (TM 9-2610-200-14). When using a tire changing machine, always follow manufacturer’s mounting and safety instructions. Failure to comply may result in serious injury or death to personnel. Always inflate tires that are mounted on rims with demountable side ring flanges or lockrings in an inflation safety cage or serious injury or death may result. a. Disassembly. CAUTION Loosen self-locking nuts no more than 1/2 inch (1.27 cm) at a time. Failure to comply may result in damage to equipment. (1) Loosen 20 self-locking nuts (1) approximately 1/2 in. (1.27 cm) at a time. (2) Remove 20 self-locking nuts (1) from outside wheel section (2). Discard self-locking nuts. (3) Remove outside wheel section (2) from tire (3). (4) Remove preformed packing (4) from inside wheel section (5). Discard preformed packing. 12-2