TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 856 of 1558
TM 9-2320-366-20-4 11-34. M1088 TRAILER STOPLIGHT SWITCH REPLACEMENT (CONT) b. Installation. WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well- ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (1) Apply antiseize compound to threads of trailer stoplight switch (1). (2) Install trailer stoplight switch (1) in tee fitting (2). (3) Install terminal lugs TL501 (3) and TL502 (4) on terminal studs (5 and 6) with two lockwashers (7) and nuts (8). c. Follow-On Maintenance. (1) Install kick panel (para 16-3). (2) Connect batteries (para 7-57). (3) Start engine and allow air pressure to raise to normal levels (TM 9-2320-366-10-1). (4) Operate trailer brake and check for proper operation and for air leaks (TM 9-2320-366-10-1). End of Task. 11-206