TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 837 of 1558
TM 9-2320-366-20-4 (7) Perform STE/ICE-R Test #50 (TM 9-4910-571-12&P). NOTE Turning adjustment screw to the left will increase wet tank pressure. Turning adjustment screw to the right will decrease wet tank pressure. (8) Turn adjustment screw (6) until 120-130 psi is observed on STE/ICE-R. (9) Tighten nut (5) on adjustment screw (6). (10) Install cover (3) on air compressor governor (4). (11) Lower cab (TM 9-2320-366-10-1). (12) Shut down engine (TM 9-2320-366-10-1). (13) Drain air tanks (TM 9-2320-366-10-1). (14) Remove STE/ICE-R from wet tank (2). WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (15) Apply antiseize compound to threads of drain valve (1). (16) Install drain valve (1) in wet tank (2). Change 1 11-187