TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 832 of 1558
TM 9-2320-366-20-4 11-31. AIR COMPRESSOR GOVERNOR REPLACEMENT/REPAIR/ADJUSTMENT This task covers: a. Removal b. Disassembly c. Cleaning/Inspection d. Assembly e. Installation f. Adjustment g. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Cab Raised (TM 9-2320-366-10-1). Air tanks drained (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) STE/ICE-R (Item 41, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Socket Set, Socket Wrench (Item 36, Appendix C) Goggles, Industrial (Item 15, Appendix C) Materials/Parts Antiseize Compound (Item 58, Appendix D) Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Repair Kit, Governor (Item 241.1, Appendix G) References TM 9-4910-571-12&P Personnel Required (2) a. Removal. NOTE Tag air hoses and connection points prior to disconnecting. (1) Disconnect two air compressor governor hoses (1) from fittings (2). (2) Remove two fittings (2) from air compressor governor (3). 11-186 Change 1