TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 826 of 1558
TM 9-2320-366-20-4 11-30. LOW PRESSURE TRANSMITTER TWO-WAY CHECK VALVE REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Cab raised (TM 9-2320-366-10-1). Air tanks drained (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Materials/Parts Antiseize Compound (Item 58, Appendix D) Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Adhesive (Item 8, Appendix D) Lockwasher (2) (Item 93, Appendix G) Adhesive (Item 10.1, Appendix D) a. Removal. NOTE • Perform step (1) on vehicle serial number 7448 and higher and vehicle serial numbers 0001 through 7447 that have previously had front lights cable assembly replaced. • Tag wires, air hoses, and connection points prior to removal. (1) Remove adhesive and boot (1) from low pressure transmitter (1.1). (1.1) Remove adhesive, two nuts (2), lockwashers (3), and terminal lugs TL201 (4) and TL202 (5) from low pressure transmitter (1.1). Discard lockwashers. (2) Disconnect two air hoses (6) from tee fitting (7). (3) Disconnect air hose (8) from fitting (9). (4) Disconnect air hose (10) from 90-degree fitting (11). 11-182 Change 1