TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download

Page 819 of 1558

TM 9-2320-366-20-4 d. M1089 Pressure Protection Valve Installation. WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (1) Apply antiseize compound to threads of pipe nipple (1). (2) Install pipe nipple (1) in pressure protection valve (2). (3) Apply antiseize compound to threads of tee fitting (3). (4) Install tee fitting (3) in pressure protection valve (2). (5) Apply antiseize compound to threads of tee fitting (4). (6) Install tee fitting (4) in tee fitting (3). (7) Apply antiseize compound to threads of bushing (5). (8) Install bushing (5) in tee fitting (3). (9) Apply antiseize compound to threads of 90-degree fitting (6). (10) Install 90-degree fitting (6) in bushing (5). (11) Apply antiseize compound to threads of fitting (7). (12) Install fitting (7) in 90-degree fitting (6). 11-175