TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 815 of 1558
TM 9-2320-366-20-4 NOTE Note position and orientation of fittings prior to removal. (6) Remove fitting (2) from tee fitting (8). (7) Remove 90-degree fitting (4) from bushing (9). (8) Remove bushing (9) from tee fitting (8). (9) Remove tee fitting (8) from pressure protection valve (5). (10) Remove pipe nipple (10) from pressure protection valve (5). b. Pressure Protection Valve Installation (All Models Except M1089/M1090/M1094). WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (1) Apply antiseize compound to threads of pipe nipple (1). (2) Install pipe nipple (1) in pressure protection valve (2). (3) Apply antiseize compound to threads of tee fitting (3). (4) Install tee fitting (3) in pressure protection valve (2). 11-171