TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 810 of 1558
TM 9-2320-366-20-4 11-28. FRONT GLADHAND ONE-WAY CHECK VALVE REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Air tanks drained (TM 9-2320-366-10-1). Gravel deflector and gravel extension removed (para 14-13). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Wrench, Box and Open End (Item 55, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Ties, Cable, Plastic (Item 69, Appendix D) Antiseize Compound (Item 58, Appendix D) a. Removal. WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. (1) Deleted (2) Deleted NOTE Tag air hoses and connection points prior to removal. Remove plastic cable ties as required. (3) Disconnect three air hoses (6) from adapter (7), 90- degree fitting (8), and 90-degree fitting (9). 11-166 Change 1