TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 809 of 1558
TM 9-2320-366-20-4 b. Installation. WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. NOTE • Both stoplight switches are installed the same way. Rear stoplight switch shown. • Terminal lugs on front stoplight switch are TL154 and TL155. (1) Apply antiseize compound to threads of stoplight switch (1) and fitting (2). (2) Install stoplight switch (1) in fitting (2). (3) Install terminal lugs TL153 (3) and TL152 (4) on stoplight switch (1) with two lockwashers (5) and nuts (6). c. Follow-On Maintenance. (1) Connect batteries (para 7-57). (2) Check operation of stoplights (TM 9-2320-366-10-1). End of Task. 11-165