TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 808 of 1558
TM 9-2320-366-20-4 11-27. STOPLIGHT SWITCH REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-57). Air tanks drained (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Antiseize Compound (Item 58, Appendix D) Lockwasher (2) (Item 93, Appendix G) a. Removal. NOTE • Both stoplight switches are removed the same way. Rear stoplight switch shown. • Tag wires and connection points prior to removal. • Terminal lugs on front stoplight switch are TL154 and TL155. (1) Remove two nuts (1), lockwashers (2), and terminal lugs TL152 (3) and TL153 (4) from stoplight switch (5). Discard lockwashers. (2) Remove stoplight switch (5) from fitting (6). 11-164 Change 1