TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 802 of 1558
TM 9-2320-366-20-4 11-25. SERVICE GLADHAND TWO-WAY CHECK VALVE REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Windshield washer reservoir and pump removed (para 18-2). Air tanks drained (TM 9-2320-366-10-1). Cab raised (TM 9-2320-366-10-1). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Antiseize Compound (Item 58, Appendix D) Nut, Self-Locking (Item 167, Appendix G) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. NOTE Tag air hoses and connection points prior to disconnecting. (1) Disconnect two air hoses (1) from branch tee fitting (2). (2) Disconnect air hose (3) from 90-degree fitting (4). (3) Disconnect air hose (5) from 45-degree fitting (6). (4) Remove self-locking nut (7), service gladhand two-way check valve (8), screw (9), and washer (10) from front fender (11). Discard self-locking nut. 11-158 Change 1