TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download

Page 801 of 1558

TM 9-2320-366-20-4 NOTE Steps (9) through (11) require the aid of an assistant. (9) Install identification plate (6) and gladhand (2) in rear crossmember (7) with lockwasher (8) and nut (9). WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (10) Apply antiseize compound to threads of reducer fitting (10). (11) Install reducer fitting (10) in adapter fitting (4). (12) Connect air hose (11) to reducer fitting (10). (13) Install dummy coupling (12) on gladhand (2). c. Follow-On Maintenance. (1) Start engine (TM 9-2320-366-10-1). (2) Release TRAILER AIR SUPPLY and SYSTEM PARK valves (TM 9-2320-366-10-1). (3) Check gladhand for air leaks. (4) Shut down engine (TM 9-2320-366-10-1). End of Task. 11-157