TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 798 of 1558
TM 9-2320-366-20-4 11-24. REAR GLADHAND REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Air tanks drained (TM 9-2320-366-10-1). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Tool Kit, Genl Mech (Item 46, Appendix C) Vise, Machinist (Item 48, Appendix C) Socket Set, Impact (Item 33, Appendix C) Materials/Parts Antiseize Compound (Item 58, Appendix D) Damping Fluid (Item 19, Appendix D) Filter Element (Item 15, Appendix G) Packing, Preformed (Item 192, Appendix G) Lockwasher (Item 69, Appendix G) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. NOTE Both rear gladhands are removed the same way. EMERGENCY gladhand shown. (1) Remove dummy coupling (1) from gladhand (2). (2) Disconnect air hose (3) from reducer fitting (4). NOTE Steps (3) and (4) require the aid of an assistant. (3) Remove reducer fitting (4) from adapter fitting (5). (4) Remove nut (6), lockwasher (7), gladhand (2), and identification plate (8) from rear crossmember (9). Discard lockwasher. 11-154 Change 1