TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 797 of 1558
TM 9-2320-366-20-4 CAUTION Ensure that filter is firmly seated in gladhand and that top edge of filter does not extend above top edge of filter well. Failure to comply may result in gladhands that leak when pressurized. (5) Install filter (9) in gladhand (10). WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (6) Apply damping fluid to preformed packing (11). (7) Install preformed packing (11) in gladhand (10). (7.1) Apply antiseize compound to threads of reducer fitting (12). (8) Install reducer fitting (12) in gladhand (10). (9) Install reducer fitting (12) with gladhand (10) in adapter (3). (10) Install dummy coupling (13) on gladhand (10). (11) Install dummy coupling chain (14) on mounting bracket (4). c. Follow-On Maintenance. (1) Start engine (TM 9-2320-366-10-1). (2) Check gladhand for air leaks. (3) Shut down engine (TM 9-2320-366-10-1). End of Task. Change 1 11-153