TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 795 of 1558
TM 9-2320-366-20-4 11-23. FRONT GLADHAND REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Air tanks drained (TM 9-2320-366-10-1). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Tool Kit, Genl Mech (Item 46, Appendix C) Materials/Parts Antiseize Compound (Item 58, Appendix D) Ties, Cable, Plastic (Item 69, Appendix D) Damping Fluid (Item 19, Appendix D) Filter Element (Item 15, Appendix G) Packing, Preformed (Item 192, Appendix G) Lockwasher (Item 70, Appendix G) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. NOTE • Both front gladhands are removed the same way. Service gladhand shown. • Remove plastic cable ties as required. (1) Remove dummy coupling (1) from gladhand (2). (2) Remove dummy coupling chain (3) from mounting bracket (4). (3) Remove gladhand (2) and reducer fitting (5) from adapter (6). NOTE Note orientation of preformed packing and filter prior to removal. (4) Remove reducer (5), preformed packing (7), and filter (8) from gladhand (2). Discard filter and preformed packing. Change 1 11-151