TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 793 of 1558
TM 9-2320-366-20-4 WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. NOTE Perform steps (3) through (6) on M1088/M1089. (3) Apply antiseize compound to threads of 90-degree fitting (3), one-way check valve (4), and branch tee fitting (5). (4) Install 90-degree fitting (3) in primary air tank (2). (5) Install one-way check valve (4) in 90-degree fitting (3). (6) Install branch tee fitting (5) in one-way check valve (4). NOTE Perform steps (7) through (9) on all models except M1088/M1089. (7) Apply antiseize compound to threads of one-way check valve (4) and branch tee fitting (5). (8) Install one-way check valve (4) in primary air tank (2). (9) Install branch tee fitting (5) in one-way check valve (4). (10) Apply antiseize compound to threads of branch tee fittings (6 and 7). (11) Install branch tee fitting (6) in primary air tank (2). (12) Install tee fitting (7) in primary air tank (2). 11-149