TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 778 of 1558
TM 9-2320-366-20-4 11-22. SECONDARY AND PRIMARY AIR TANKS REPLACEMENT (CONT) b. Secondary Air Tank Installation (All Models Except M1088/M1089). WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (1) Apply antiseize compound to threads of 90-degree fittings (1 and 2), and threads on both sides of reducer fitting (3). (2) Install 90-degree fittings (1 and 2) in inversion valve (4). (3) Install reducer fitting (3) in two-way check valve (5). (4) Install inversion valve (4) on reducer fitting (3). (5) Apply antiseize compound to threads of drain valve (6). (6) Install drain valve (6) in secondary air tank (7). 11-138