TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 774 of 1558
TM 9-2320-366-20-4 11-22. SECONDARY AND PRIMARY AIR TANKS REPLACEMENT (CONT) (4) Disconnect air hose (7) from branch tee fitting (6). (5) Disconnect air hose (8) from 90-degree fitting (9). (6) Disconnect air hose (10) from 90-degree fitting (11). NOTE • Vehicles may be equipped with either corrosion enhanced clamps or non- corrosion enhanced clamps. Corrosion enhanced clamps have a self-locking nut and work lining. When removing a non- corrosion enhanced clamp, replace it with a corrosion enhanced clamp. • Perform steps (7) through (8.1) on vehicles not equipped with corrosion enhanced clamps. (7) Remove two screws (12) from clamps (13). (8) Remove secondary air tank (14) from two clamps (13). (8.1) Remove two clamps (13) from battery box (14.1). Discard clamps and screws. 11-136 Change 1