TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download

Page 75 of 1558

TM 9-2320-366-20-4 7-84. M1083/M1084/M1085/M1086/M1090/M1092/M1093/M1094/M1096 REAR LIGHTS CABLE ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Batteries disconnected (para 7-57). Kick panel removed (para 16-3). Exhaust muffler removed (para 5-2). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Goggles, Industrial (Item 15, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Socket Set, Socket Wrench (Item 34, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Ties, Cable, Plastic (Item 69, Appendix D) Lockwasher (14) (Item 82, Appendix G) Lockwasher (3) (Item 96, Appendix G) Nut, Self-Locking (14) (Item 150, Appendix G) Nut, Self-Locking (13) (Item 128, Appendix G) Washer, Spring (2) (Item 289, Appendix G) Personnel Required (2) a. Removal. NOTE • Note routing of rear lights cable assembly and clamps prior to removal. (1) Remove two self-locking nuts (1), clamps (2), and screws (3) from left taillight carrier (4). (2) Remove two clamps (2) from rear lights cable assembly (5). Change 1 7-397