TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 737 of 1558
TM 9-2320-366-20-4 NOTE Note orientation of fittings and plug prior to removal. (5) Remove run tee fitting (2) from air brake protecting valve (10). (6) Remove two 45-degree fittings (3) from air brake protecting valve (10). (7) Remove three 90-degree fittings (5) from air brake protecting valve (10). (8) Remove plug (12) from air brake protecting valve (10). f. M1088 Air Brake Protecting Valve Installation (With Gladhand Selector Valves). WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (1) Apply antiseize compound to threads of plug (1), three 90-degree fittings (2), two 45-degree fittings (3), and run tee fitting (4). (2) Install plug (1) in air brake protecting valve (5). (3) Install three 90-degree fittings (2) in air brake protecting valve (5). (4) Install two 45-degree fittings (3) in air brake protecting valve (5). (5) Install run tee fitting (4) in air brake protecting valve (5). 11-105