TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download

Page 734 of 1558

TM 9-2320-366-20-4 11-18. AIR BRAKE PROTECTING VALVE REPLACEMENT (CONT) NOTE Note orientation of fittings and plug prior to removal. (5) Remove two run tee fittings (2) from air brake protecting valve (10). (6) Remove two 45-degree fittings (4) from tee fitting (12). (7) Remove tee fitting (12) from air brake protecting valve (10). (8) Remove three 90-degree fittings (6) from air brake protecting valve (10). (9) Remove plug (13) from air brake protecting valve (10). d. M1088 Air Brake Protecting Valve Installation (Without Gladhand Selector Valves). WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (1) Apply antiseize compound to threads of plug (1), three 90-degree fittings (2), tee fitting (3), two 45-degree fittings (4), and run tee fittings (5). (2) Install plug (1) in air brake protecting valve (6). (3) Install three 90-degree fittings (2) in air brake protecting valve (6). (4) Install tee fitting (3) in air brake protecting valve (6). (5) Install two 45-degree fittings (4) in tee fitting (3). (6) Install two run tee fittings (5) in air brake protecting valve (6). 11-102