TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 729 of 1558
TM 9-2320-366-20-4 11-18. AIR BRAKE PROTECTING VALVE REPLACEMENT This task covers: a. Air Brake Protecting Valve Removal (All models except M1088) b. Air Brake Protecting Valve Installation (All models except M1088) c. M1088 Air Brake Protecting Valve Removal (Without Gladhand Selector Valves) d. M1088 Air Brake Protecting Valve Installation (Without Gladhand Selector Valves) e. M1088 Air Brake Protecting Valve Removal (With Gladhand Selector Valves) f. M1088 Air Brake Protecting Valve Installation (With Gladhand Selector Valves) g. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Air tanks drained (TM 9-2320-366-10-1). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Antiseize Compound (Item 58, Appendix D) Nut, Self-Locking (2) (Item 167, Appendix G) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Air Brake Protecting Valve Removal (All models except M1088). NOTE Tag air hoses and connection points prior to disconnecting. (1) Disconnect air hose (1) from fitting (2). (2) Disconnect air hose (3) from 90-degree fitting (4). (3) Disconnect two air hoses (5) from 45-degree fittings (6). (4) Disconnect two air hoses (7) from run tee fitting (8). Change 1 11-97