TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 713 of 1558
TM 9-2320-366-20-4 NOTE Perform steps (11) and (12) on M1089. (11) Remove two 45-degree fittings (4.1) from relay valve (13). (12) Remove fitting (4) from relay valve (13). b. Installation. WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. NOTE Perform steps (1) through (5) on all models except M1089. (1) Apply antiseize compound to threads of two 90-degree fittings (2), 90-degree fitting (3), three fittings (4), and 45- degree fitting (5). (2) Deleted. (3) Install two 90-degree fittings (2) in relay valve (6). (4) Install 90-degree fitting (3) in relay valve (6). (5) Install three fittings (4) in relay valve (6). (6) Install 45-degree fitting (5) in relay valve (6). Change 1 11-82.1/(11-82.2 Blank)