Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download

Page 701 of 1558

TM 9-2320-366-20-4 (2) Loosen two screws (4) on load averaging channel mounting springs (5). (3) Remove two screws (4) and load averaging channel (3) from load averaging channel mounting springs (5). (4) Remove two screws (6), and load averaging channel mounting springs (5) from intermediate axle (8) and rear axle (9). b. Installation. WARNING Adhesive Sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (1) Apply adhesive to threads of two screws (1). (2) Position two load averaging channel mounting springs (2) on intermediate axle (3) and rear axle (4) with two and screws (1). Change 1 11-71