TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 699 of 1558
TM 9-2320-366-20-4 WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (36) Apply antiseize compound to threads of two 90-degree fittings (10 and 13). (37) Install 90-degree fitting (13) in left rear service brake air chamber (11). (38) Connect center air hose (12) to 90-degree fitting (13). (39) Install 90-degree fitting (10) in left rear service brake air chamber (11). (40) Connect air hose (9) to 90-degree fitting (10). f. Follow-On Maintenance. (1) Start engine (TM 9-2320-366-10-1) and allow time for air pressure to build to normal operating pressure. (2) Shut down engine (TM 9-2320-366-10-1). (3) Check around load sensing valve, air hoses and fittings for air leaks. (4) Start engine (TM 9-2320-366-10-1). (5) Road test vehicle and check for proper brake operation. (6) Shut down engine (TM 9-2320-366-10-1). End of Task. Change 1 11-69