TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 694 of 1558
TM 9-2320-366-20-4 11-10. LOAD SENSING VALVE AND CONTROL CABLE REPLACEMENT/ADJUSTMENT (CONT) NOTE • Perform step (13) on M1088. • Begin by using holes furthest left on crossmember. Final position will be determined during load sensing valve adjustment. (13) Position load sensing valve (2), bracket (5) and four spacers (9) on crossmember (10) with two screws (11), and self-locking nuts (12). (14) Connect air hose (13) to 45-degree fitting (1). NOTE Perform step (15) on all models except M1088. (15) Connect air hoses (14 and 15) to tee fitting (3). NOTE Perform step (16) on M1088 and M1089. (16) Connect air hose (16) to 45-degree fitting (4). 11-64 Change 1