TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 687 of 1558
TM 9-2320-366-20-4 11-10. LOAD SENSING VALVE AND CONTROL CABLE REPLACEMENT/ADJUSTMENT This task covers: a. Load Sensing Valve Control Cable Removal b. Load Sensing Valve Control Cable Installation c. Load Sensing Valve Removal d. Load Sensing Valve Installation e. Load Sensing Valve Adjustment f. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Air tanks drained (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Goggles, Industrial (Item 15, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) STE/ICE-R (Item 39, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Materials/Parts (Cont) Antiseize Compound (Item 58, Appendix D) Adhesive (Item 3, Appendix D) Tee, Pipe (Item 68.1, Appendix D) Nut, Self-Locking (2) (Item 167, Appendix G) References TM 9-4910-571-12 & P Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Load Sensing Valve Control Cable Removal. (1) Loosen jam nut (1) on cable clamp (2). (2) Loosen screw (3) on cable clamp (2). (3) Remove load sensing valve control cable (4) from cable clamp (2). Change 1 11-57