TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 683 of 1558
TM 9-2320-366-20-4 (5) Position left bracket (5) and right bracket (6) on brake foot pedal (7). (6) Lubricate pivot point of brake foot pedal (7) with MIL-G- 21164 grease. NOTE Bushings (8) shall be press fitted on installation. (7) Install two bushings (8) on left bracket (5) and right bracket (6). (8) Position brake foot pedal (7) and foot control valve (4) on bracket (9) with two screws (10), washers (11), and self- locking nuts (12). (9) Position two screws (13), washers (14), and self-locking nuts (15) in foot control valve (4). (10) Tighten two self-locking nuts (12 and 15) to 18 lb-ft (24 N·m). (11) Install spring (16) on bracket (9) and brake foot pedal (7). (12) Install foot control linkage (17), on brake foot pedal (7) with pin (18), washer (19), and cotter pin (20). Change 1 11-53