Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download

Page 677 of 1558

TM 9-2320-366-20-4 (37) Connect six air hoses (18) to tee fittings (14, 15, and 17). (38) Start engine (TM 9-2320-366-10-1) and allow time for REAR BRAKE AIR pressure gage to reach at least 100 psi. (39) Push in SYSTEM PARK control (TM 9-2320-366-10-1). (40) Loosen two nuts (19) on caging bolts (20). (41) Remove two caging bolts (20) from front and rear air chambers (2 and 11). NOTE Steps (42) through (44) require the aid of an assistant. (42) Apply brake pedal and continue holding until steps (43) and (44) are accomplished. (43) Hand tighten collet nuts (1 and 10) against plunger housings (3 and 12). (44) Tighten collet nuts (1 and 10) 3/16 turn (1/2 teeth). Change 1 11-47