TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 675 of 1558
TM 9-2320-366-20-4 WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. NOTE • Perform steps (23) through (30) on M1088 and M1089, and vehicle serial numbers 2451 and higher. • Clean fittings and rear air chamber of all sealing compound residue prior to installation. (23) Apply sealing compound to threads of two adapters (13). (24) Install two adapters (13) in rear air chamber (11). (25) Apply sealing compound to threads of tee fittings (14 and 15). (26) Install tee fittings (14 and 15) in two adapters (13). (27) Apply sealing compound to threads of adapter (16). (28) Install adapter (16) in rear air chamber (11). (29) Apply sealing compound to threads of tee fitting (17). (30) Install tee fitting (17) in adapter (16). 11-45