Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download

Page 671 of 1558

TM 9-2320-366-20-4 b. Installation. (1) Install collet nut (1) on front air chamber (2) to bottom of threads. WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (2) Apply sealing compound to threads of front air chamber (2). WARNING Ensure air chamber is caged prior to installation. Failure to comply may result in injury to personnel. CAUTION Ensure front air chamber is installed with fitting ports positioned up. Failure to comply may result in damage to equipment. (3) Install front air chamber (2) in plunger housing (3) until it bottoms. CAUTION Loosen front air chamber no more than one full turn. Failure to comply may result in damage to equipment. (4) Loosen front air chamber (2) until fitting ports are up. (5) Tighten collet nut (1) against plunger housing (3). 11-41