TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 667 of 1558
TM 9-2320-366-20-4 11-8. REAR BRAKE AIR CHAMBER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Rear tire removed (TM 9-2320-366-10-2). Rear spring brakes caged (para 11-6). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Pipe (Item 56, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Sealing Compound (Item 58, Appendix D) Nut, Plain, Round (Item 127.1, Appendix G) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. NOTE Intermediate axle and rear axle brake air chambers are removed/installed the same way. Intermediate axle brake air chambers shown. a. Removal. NOTE Tag air hoses and connection points prior to removal. (1) Disconnect six air hoses (1) from tee fittings (2, 3, and 4). Change 1 11-37