TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 663 of 1558
TM 9-2320-366-20-4 11-7. FRONT BRAKE AIR CHAMBER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Pipe (Item 56, Appendix C) Trestle, Motor Vehicle Maintenance (Item 47, Appendix B) Goggles, Industrial (Item 15, Appendix C) Respirator, Air Filter (Item 29, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Antiseize Compound (Item 58, Appendix D) Ties, Cable, Plastic (Item 69, Appendix D) Nut, Plain, Round (Item 127.1, Appendix G) Personnel Required (2) a. Removal. WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. CAUTION Use caution not to pinch left side air hoses when positioning trestles. Failure to comply may result in damage to equipment. NOTE Left and right front brake air chambers are removed the same way. Left side shown. (1) Position front of vehicle on trestle so tire is off ground. (2) Remove left front tire from vehicle (TM 9-2320-366-10-2). Change 1 11-33