TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 660 of 1558
TM 9-2320-366-20-4 11-6. REAR SPRING BRAKE CAGING This task covers: a. Caging b. Uncaging INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Tools and Special Tools (Cont) Socket, Socket Wrench (Item 40, Appendix C) Wrench, Torque, 0-600 lb-ft (Item 60, Appendix C) Wrench Set, Socket (Item 50, Appendix C) Material/Parts Nut, Self-Locking (2) (Item 161, Appendix G) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Caging. NOTE To cage brakes, apply caging procedure to both top and bottom spring brake chambers. (1) Remove nut (1) and washer (2) from caging bolt (3). (2) Remove caging bolt (3) from caging bolt holder (4). 11-30 Change 1