TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 657 of 1558
TM 9-2320-366-20-4 d. Assembly. (1) Apply grease to inside surfaces of seal (1). (2) Position and seat seal (1) on anchor plunger (2). (3) Apply grease to inside surface of seal (3). (4) Position and seat seal (3) on adjusting screw (4). (5) Install adjusting screw (4) in adjusting sleeve (5) until snug. Back off 1/4 turn. (6) Apply film of grease on adjusting sleeve (5). CAUTION Ensure adjusting sleeve is installed in adjusting plunger with large shouldered end up. Failure to comply will cause self- adjusting feature not to function. (7) Position adjusting sleeve (5) in adjusting plunger (6). (8) Apply film of grease on adjusting plunger (6). 11-27