TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 653 of 1558
TM 9-2320-366-20-4 11-5. REAR BRAKE PLUNGER ASSEMBLY REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Cleaning/Inspection d. Assembly e. Installation f. Follow-On Maintenance INITIAL SETUP Equipment Conditions Rear brake shoes removed (para 11-3). Rear brake air chamber removed (para 11-8). Tools and Special Tools Trestle, Motor Vehicle Maintenance (Item 47, Appendix C) Goggles, Industrial (Item 15, Appendix C) Respirator, Air Filter (Item 29, Appendix C) Gloves, Rubber (Item 13, Appendix C) Tool Kit, Genl Mech (Item 46, Appendix C) Tools and Special Tools (Cont) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Brake Plunger Seal Driver (Item E-3, Appendix E) Materials/Parts Solvent, Dry Cleaning (Item 65, Appendix D) Grease, Automotive and Artillery (GAA) (Item 22, Appendix D) Lockwasher (4) (Item 136, Appendix G) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. (1) Remove wedge assembly (1) from plunger housing (2). 11-23