TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 647 of 1558
TM 9-2320-366-20-4 11-4. FRONT BRAKE PLUNGER ASSEMBLY REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Cleaning/Inspection d. Assembly e. Installation f. Follow-On Maintenance INITIAL SETUP Equipment Conditions Front brake shoes removed (para 11-2). Front brake air chamber removed (para 11-7). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Trestle, Motor Vehicle Maintenance (Item 47, Appendix C) Gloves, Rubber (Item 13, Appendix C) Brake Plunger Seal Driver (Item E-3, Appendix E) Materials/Parts Solvent, Dry Cleaning (Item 65, Appendix D) Grease, Automotive and Artillery (GAA) (Item 22, Appendix D) Rag, Wiping (Item 50, Appendix D) Lockwasher (4) (Item 118, Appendix G) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. (1) Remove wedge assembly (1) from plunger housing (2). 11-17