TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 646 of 1558
TM 9-2320-366-20-4 11-3. REAR BRAKE SHOES REPLACEMENT/ADJUSTMENT (CONT) CAUTION • Wheel drum clearance must be checked along centerline of brake shoe at scallop. Failure to comply may result in damage to equipment. • All adjustments on any wheel should be within six clicks of one another. Record the number of clicks as adjusting screw is loosened. If not, repeat procedure or examine for damage. Failure to comply may result in damage to equipment. (17) Back-off adjusting screw (8) to obtain 0.020-0.040 in. (0.051-0.102 cm) clearance between brake shoe and wheel drum. (18) Remove screw (6), lockwasher (7), and brake adjusting tool support from spider (4). (19) Install lockwasher (7) and screw (6) in spider (4). e. Follow-On Maintenance. (1) Install tire (TM 9-2320-366-10-2). (2) Start engine (TM 9-2320-366-10-1). (3) Road test truck and check for proper brake operation. (4) Shut down engine (TM 9-2320-366-10-1). End of Task. 11-16 Change 1