TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 639 of 1558
TM 9-2320-366-20-4 11-3. REAR BRAKE SHOES REPLACEMENT/ADJUSTMENT This task covers: a. Removal b. Inspection c. Installation d. Adjustment e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tire removed (TM 9-2320-366-10-2). Brakes caged (para 11-6). Tools and Special Tools Trestle, Motor Vehicle Maintenance (Item 47, Appendix C) Tool Kit, Genl Mech (Item 46, Appendix C) Tool, Spring Removal (Item 85, Appendix B) Respirator, Air Filter (Item 29, Appendix C) Adjusting Tool, Brake Shoe (Item 2, Appendix C) Brake Adjusting Tool Support (Item E-2, Appendix E) Materials/Parts Rag, Wiping (Item 50, Appendix D) Grease, Automotive and Artillery (GAA) (Item 22, Appendix D) Lockwasher (2) (Item 107, Appendix G) Personnel Required (2) a. Removal. WARNING • Wheel drum weighs approximately 90 lbs (41 kg). Use the aid of an assistant to help remove wheel drum. Failure to comply may result in injury to personnel. • Brake shoes may be covered with dust. Breathing this dust may be harmful to your health. Do not use compressed air to clean brake shoes. Wear a filter mask approved for use against brake dust. Failure to comply may result in injury to personnel. NOTE Left and right rear brake shoes are removed the same way. Left side shown. (1) Remove wheel drum (1) from wheel hub (2). Change 1 11-9