TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 633 of 1558
TM 9-2320-366-20-4 (2) Remove two return springs (3) from brake shoes (4). (3) Remove two brake shoes (4) from holddown clips (5). (4) Perform front brake plunger assembly replacement /repair (para 11-4). b. Inspection. CAUTION Replace wheel drums that fail visual inspection. Failure to comply may result in damage to equipment. (1) Clean wheel drums of all mud, sand, and debris. (2) Inspect wheel drums for the following: a. Braking surface of wheel drums must be free of scoring and cracks. b. Maximum inside diameter, which is stamped on wheel drum, does not exceed 15.12 in. (38.4 cm). c. Wheel drum mounting holes must not be egg-shaped or have cracks around edges. d. Wheel drum mounting surface must be flat. (3) Inspect brake shoes for presence of scallops at brake shoe lining four inner corners. 11-3