TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 630 of 1558
TM 9-2320-366-20-4 10-30 Change 2 10-6. SPINDLE REPLACEMENT (CONT) (13) Connect air hose (17) to 45-degree fitting (11). d. Follow-On Maintenance (1) Install front brake air chamber (for front spindles only) (para 11-7). (2) Install rear brake air chambers (for intermediate and rear spindles only) (para 11-8). (3) Install front brake shoes (for front spindles only) (para 11-2). (4) Install rear brake shoes (for intermediate and rear spindles only) (para 11-3). (5) Install wheel bearing/CTIS seal (para 10-2). (6) Install differential spider assembly (para 10-3). (7) Refill hub assembly (for front spindles only) (Appendix H). (8) Install wheel and tire (TM 9-2320-366-10-2). (9) Lower cab (TM 9-2320-366-10-1). (10) Start engine (TM 9-2320-366-10-1). (11) Operate vehicle, checking for proper steering operation and excessive vibration (TM 9-2320-366-10-1). (12) Shut down engine (TM 9-2320-366-10-1). (13) Check for oil leaks around wheel end assembly. End of Task. NOTE Step (13) applies to intermediate and rear spindles only.