TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 629 of 1558
TM 9-2320-366-20-4 Change 2 10-29 (9) Apply thread sealant to 10 screws (12). (10) Position brake spider assembly (13), 10 washers (14), and screws (12) on hub assembly (7). (11) Tighten 10 screw (12) to 110-145 lb-ft (149-196 N•m). (12) Connect two air hoses (15 and 16) to fittings (8 and 9). WARNING NOTE Intermediate and rear spindle mounting bolts are installed through the rear of hub assembly. NOTE Step (12) applies to front spindles only. Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel.