TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 621 of 1558
TM 9-2320-366-20-4 b. Filling. WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. NOTE Left and right bogie covers are installed the same way. Left cover shown. (1) Apply light bead of sealing compound to seating surface of bogie housing (1). (2) Install cover (2) on bogie housing (1) with matchmarks aligned. (3) Position six screws (3) in cover (2). (4) Tighten six screws (3) to 24 lb-ft (33 N·m). (5) Remove plugs (4 and 5) from bogie housing (1) and cover (2). (6) Fill bogie housing (1) with lubricating gear oil (Appendix H). WARNING Adhesive sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (7) Apply sealing compound to threads of plugs (4 and 5). (8) Install plugs (4 and 5) in bogie housing (1) and cover (2). 10-21