TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 612 of 1558
TM 9-2320-366-20-4 10-12 Change 2 10-3. DIFFERENTIAL SPIDER ASSEMBLY REPLACEMENT This task covers: a. Removal b. Cleaning/Inspection c. Installation d. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Goggles, Industrial (Item 15, Appendix C) Gloves, Rubber (Item 13, Appendix C) Pan, Drain (Item 24, Appendix C) Materials/Parts Rag, Wiping (Item 50, Appendix D) Gasket Maker, RTV Silicone (Item 21.1, Appendix D) Solvent, Dry Cleaning (Item 65, Appendix D) Grease, Automotive and Artillery (GAA) (Item 22, Appendix D) Packing, Preformed (4) (Item 208, Appendix G) a. Removal. (1) Position fill port at 6 o'clock location. (2) Drain oil from wheel end hub assembly (3). (2.1) Remove 12 screws (2) from bevel gear hub cover (3). (2.2) Remove bevel gear hub cover (3) from wheel end hub assembly (1). (3) Remove thrust bearing (4) and thrust washer (5) from bevel gear hub cover (2). NOTE Front, intermediate, and rear axle different- ial spider assemblies are removed the same way. Left front axle differential spider assembly shown.