TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 60 of 1558
TM 9-2320-366-20-4 7-82. FRONT LIGHTS CABLE ASSEMBLY REPLACEMENT (CONT) (7) Install terminal lugs TL202 (25) and TL201 (26) on low pressure transmitter (27) with two lockwashers (28) and nuts (29). WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (8) Apply adhesive to terminal lugs TL202 (25) and TL201 (26) on air pressure transmitter (27). (8.1) Install boot (27.1) on low pressure transmitter (27). (8.2) Apply antiseize to holes TLR and TTR and around edges of boot (27.1). (9) Connect connector J52 (30) to P52F (31). 7-384 Change 1