TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 581 of 1558
TM 9-2320-366-20-4 (9) Install fitting (19) in transmission oil cooler (18). (10) Position transmission oil cooler hose (20) on fitting (19). NOTE Position hole in fitting so that hole faces upward towards engine. (11) Install fitting (21) in transmission oil cooler (18). (12) Position transmission oil cooler hose (22) on fitting (21). (13) Tighten transmission oil cooler hoses (20 and 22) to 94- 104 lb-ft (127-141 N·m). WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (14) Apply antiseize compound to threads of 45-degree fitting (23). (15) Install 45-degree fitting (23) on transmission oil cooler hose (22). (16) Connect transmission oil sampling hose (24) to 45- degree fitting (23). Change 1 8-141